Utilitaire benne Iveco Daily 70C18 4x2 Gazoil Euro 6 grue neuf
Urgent- 5 M³
- 7 Tonnes
- Gdańsk
|
Informations principales
|
|
|---|---|
| Réf. site : | 10664437 |
| Carrosserie | Utilitaire benne |
| Marque | Iveco |
| Gamme (marque : Iveco) | Daily |
| Modèle | 70C18 |
| Etat | Neuf |
| Date de 1ere immatriculation | 16/07/2026 |
| Pays | POLOGNE |
| Constructeur | Iveco |
État du matériel |
|
|---|---|
| Energie | Gazoil |
| Pays (gamme) | POLOGNE |
Grue Auxiliaire |
|
|---|---|
| |
| Capacité de levage en bout de flèche | 1.12 Tonnes |
| Capacité de charge | 2700 Kg |
| Rayon de travail | 3.6 mètres |
Suspension / Essieux |
|
|---|---|
| Essieux | 4x2 |
Moteur |
|
|---|---|
| Puissance | 176 CV |
| Cylindrée | 2998 cm3 |
Dimensions |
|
|---|---|
| Surface | 8.15 m² |
| Volume | 5 m³ |
Equipement Véhicule utilitaire Iveco |
|
|---|---|
|
Informations complémentaires Iveco 70C18 |
|---|
|
Caractéristiques Iveco Daily - Grue |
|
|---|---|
| Conduite | Volant à gauche |
| Normes Euro | Iveco Euro 6 |
| Kilométrage | 16 km |
| Capacité du réservoir | 115 L |
Dimensions de la caisse |
|
|---|---|
| Hauteur intérieure de la caisse | 0.6 mètres |
| Largeur intérieure de la caisse | 2.25 mètres |
| Longueur intérieure de la caisse | 3.62 mètres |
Boîte de vitesse et transmission |
|
|---|---|
| Boîte de vitesse | Boîte manuelle |
Tonnage |
|
|---|---|
| PTC | 7 Tonnes |
Equipement cabine |
|---|
|
Remarques |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Voir tout
|
Remarques |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Informations principales
|
|
|---|---|
| Réf. site : | 10664437 |
| Carrosserie | Utilitaire benne |
| Marque | Iveco |
| Gamme (marque : Iveco) | Daily |
| Modèle | 70C18 |
| Etat | Neuf |
| Date de 1ere immatriculation | 16/07/2026 |
| Pays | POLOGNE |
| Constructeur | Iveco |
État du matériel |
|
|---|---|
| Energie | Gazoil |
| Pays (gamme) | POLOGNE |
Grue Auxiliaire |
|
|---|---|
| |
| Capacité de levage en bout de flèche | 1.12 Tonnes |
| Capacité de charge | 2700 Kg |
| Rayon de travail | 3.6 mètres |
Suspension / Essieux |
|
|---|---|
| Essieux | 4x2 |
Moteur |
|
|---|---|
| Puissance | 176 CV |
| Cylindrée | 2998 cm3 |
Dimensions |
|
|---|---|
| Surface | 8.15 m² |
| Volume | 5 m³ |
Equipement Véhicule utilitaire Iveco |
|
|---|---|
|
Informations complémentaires Iveco 70C18 |
|---|
|
Caractéristiques Iveco Daily - Grue |
|
|---|---|
| Conduite | Volant à gauche |
| Normes Euro | Iveco Euro 6 |
| Kilométrage | 16 km |
| Capacité du réservoir | 115 L |
Dimensions de la caisse |
|
|---|---|
| Hauteur intérieure de la caisse | 0.6 mètres |
| Largeur intérieure de la caisse | 2.25 mètres |
| Longueur intérieure de la caisse | 3.62 mètres |
Boîte de vitesse et transmission |
|
|---|---|
| Boîte de vitesse | Boîte manuelle |
Tonnage |
|
|---|---|
| PTC | 7 Tonnes |
Equipement cabine |
|---|
|
Remarques |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Voir tout
|
Remarques |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Utilitaire benne Mercedes 25ASTER
Utilitaire benne Iveco Daily 35C15
Utilitaire benne Iveco Daily 35C13
Utilitaire benne standard Ford Transit